PHTT-CC-202

PRECISE HUMIDITY COMBI-COMPANION
Holding Cabinet for Combi-Companion Racks
Combi-Companion Clymate IQ® "PHTT-CC" Series

PHTT-CC-202 Spec Sheet

Clymate IQ® cabinet improves combi-oven workflow and takes the guesswork out of holding sensitive foods, providing professional results every time

Model may differ from the image(s) shown.
Model may be shown with Optional Accessories.
Please Consult Factory.

DESCRIPTION

PHTT-CC Series Product Video

PHTT-CC-202-MW Model Description
Free up your combination oven with our PHTT-CC-202-MW combi-companion oven! Optimize your kitchen's production and bottom line with this cabinet that is uniquely designed to hold roll-in-racks from popular companies such as Convotherm, Electrolux, Eloma, and Rational. Simply transfer your full-size roll-in-rack into this unit to free up your oven and to keep foods at just-cooked taste and texture.

The ClymateIQ heating system gives precise control over the cabinet's interior environment with simple electronic controls that allow users to independently set both temperature and relative humidity. Our ClymateIQ system, combined with self-closing hinges and an exclusive push/pull heated air distribution system, allow users to frequently open the cabinet while keeping heat and humidity levels stable during your operation's business service times.

The PHTT-CC-202-MW features unparalleled ease of cleaning. The top-mounted heating system leaves a flat interior of the unit where grease or food particles tend to build up. To clean, simply slide out the large volume, removable water pan, lift the heating element, and wipe away the day's mess on the bottom and sides of the unit.

Equipped with four fully adjustable legs, this unit is designed to be the ultimate place and use "combi-companion" on the market. This unit is great for operations that do not have a need to move the unit. A Tri-directional AC pocket gives users improved cord placement along the back of the unit, not restricting placement no matter where it needs to be

Key Features
- Fits full-sized roll-in-racks from popular companies such as Convotherm, Electrolux, Eloma, and Rational

- Equipped with Clymate-IQ heating system for pinpoint control over temperatures from 90-200°F and humidity from 0-90% within the unit

- Exclusive push/pull air system to ensure both uniform and rapid recovery of set conditions

- Top-mounted heating system to aid in cleaning the interior of the unit

- Equipped with 4 fully adjustable legs and Tri-directional AC pocket for easy place and use.

FEATURES

OPTIONS & ACCESSORIES

Door Latch
Key Locking Door Latch - Heavy duty door latch with key locking capabilities
Paddle Door Latch - Recessed paddle style door latch
Doors
Glass Doors - Full view glass doors allow complete visibility of product without opening the door, available in full and Dutch
Extra
Auto Water Fill
Cord Winder Brackets - Cabinet mounted brackets allow for cord to be wrapped and out of the way when not in use
Menu Card Holder - Door mounted frame to display menu card
Hinging
Hinges on Left Side - Left hand door hinging, available on single door models only

SHORT FORM SPEC

CONSTRUCTION. Heliarc welded, single unit construction of stainless steel; 20 gauge polished exterior, 22 gauge stainless steel interior with easy-to-clean coved corners. Welded tubular base frame shall be 1" square, heavy gauge stainless steel tubing, with 10 gauge stainless steel reinforcing plates at corners.

INSULATION. "Ultra-Guard" UG-26 high density fiberglass insulation throughout; top, back, bottom, sides and doors.

HANDLES. Heavy-duty, 1" diameter tubular stainless steel push handles, mounted on each side and one rear horizontal mounted tubular handle standard on mobile

DOORS AND LATCHES. Flush mounted, stainless steel insulated doors shall be self-closing and field reversible. High temperature gasket sealed; gasket shall be cabinet mounted. Magnetic work flow door handle shall be full length, vertical, and positive closing. Door shall have three (3) heavy-duty edgemount die cast hinges.

STATIONARY COMBI-COMPANION LEGS. Heavy-duty stainless adjustable legs, each mounted to a 10 gauge reinforcement plate, which is welded to an 18 gauge tubular base frame.

PHTT SYSTEM/CONTROLS. Built in humidified holding system shall include two (2) separate long life Incoloy nickel-chromium alloy heating elements per cavity to provide separate, adjustable, precise food temperature from 90°F to 200°F (32°C to 93°C) and maintain food texture with settings from 0 to 90% RH (Crisp to Moist). Patented Precise Humidity Temperature Technology controls shall be provided for each function. One to control the interior air temperature, and one to control the interior air moisture with hydro immersion water bath. Stainless steel water reservoir shall be removable for ease of cleaning/sanitation. Built-in drip trough has removable drain plug. System shall have circulating fan to assist heat recovery/moist air distribution. Controls shall be up-front, recessed and eye-level for convenience and safety. ON/OFF power switch, humidity cycle light and thermostat cycling light shall also be included.

ELECTRICAL CHARACTERISTICS. 3 wire grounded tri-directional power cord and plug, rear mounted for safety. See electrical data chart above for amperage and receptacle configuration. See electrical data chart for models that may require a dedicated circuit.

INSTALLATION. Unit should not be installed in an area where adverse environmental conditions are present.